BSM27 PIR Motion Sensor Module

SKU: BSM27 Category:

Overview

BSM27 Pyroelectric infrared sensor module adopts high performance PIR sensor and Pyroelectric dedicated LDO chip. It has the features, as low static power consumption, wide operating voltage, and high sensitivity. This module can be triggered repeatedly. If it’s detected again during sensing output delay time, the delay period will be recalculated.

Key Features

Automatic Induction (when people enter into its sensing area, it gives an high-level output; when people leave the sensing area, it closes high-level output by 1s automatic-delay, and gives an low-level output.)
Photo-resistor control:
This module has no photosensitive control function,
And it detects the whole day.
Repeatable trigger mode: after high-level output, on the delay period, if there is human activity in its sensing range, the output remain high-level, and will not convert from high-level to low-level until people leave and the delay period is over. (when the sensor module detects every human body activity, it extend a delay period automatically, and use the last activity time as the starting time of delay period.)
Induction blocking time(default setting as 2s second): after every sensing output(from high-level to low-level output), a blocking time can be set. At this period, the sensor does not receive any sensor signal. By this function, it can realize interval working, to be applied to interval detection production. At the same time, this feature can inhibit all kinds of interference generated by the switching of load.
High-level output: TTL output, easy to interface with kinds of circuits;

Applications

  • Air conditioners, smart fans, smart door locks
  • Security products,
  • Human body induction toys, Human body induction lamps, switches, and appliances

Technical Specifications

Working Voltage 3.3~12V DC
Static Current 10μA, @3.3V @25°C
Level Output High Level, 3V; Low Level, 0V
Trigger Mode Repeatable
Blocking Time 2S (fixed)
PCB Size 32×28×12.3mm
Detection Angle 100°(Depend on the Lens)
Working Temperature -10°C ~ +70°C
Fresnel Lens Size Diameter12.6mm
Detection Distance >2m @25°C